Cold Fire® is a non-toxic and 100% biodegradable plant-based formula that when combined with water acts as a catalyst to remove both the heat and hydrocarbons from the fire tetraheadon. MADE IN USA

Cold Fire® encapsulates and breaks down the molecular structure of the hydrocarbons in the fuel source by undergoing an endothermic reaction that removes the heat in a fire, while also encapsulating the fuel source to limit oxygen in take and prevent additional burning.

Cold Fire® has 6 times the penetrating capability of water and 3 times the ability to absorb BTU's as well. Therefore allowing first responders to enter and exit a fire situation much more rapidly with less heat all while using less water and product (than compared with AFFF, for example) resulting in significantly less water and smoke damage.

Cold Fire® also provides an impressive thermal barrier protection and the ability to cool metals extremely quickly. When applied to persons or objects it will block large amounts of heat from penetrating the surface preventing burns while also rapidly cooling objects, especially metals, in seconds allowing access to a trapped car victim or quickly cooling industrial products/tires etc…

  • Cold Fire® is a wetting-agent and has as the following ratings and listings:
  • UL Class A & B listed (2N75) and can also extinguish Class D & K fires
  • NFPA 18 listed (UL 162)
  • Class B foam listed (UL 711)
  • EPA SNAP Listed
  • Wildland tested and approved (Missoula)
  • Approved by the NFS to be used within 300 feet of a body of water
  • HMIS rating of 0,0,0
  • Indefinite Shelf-Life


Cold Fire® is 100% biodegradable, non-corrosive, and non-toxic so it requires little clean-up, no agitation, and no flushing out of your equipment after use. It is one of the few, possibly only, fire suppression agents available to extinguish E85 and all other alcohol/bio-fuel fires. It is Manufactured in the USA.

Why Switch?